The Specific Energy HMI Results page Page (shown below) shows historical pump volumes and energy consumption and gives estimates of energy reduction. It can be queried for any period with a one-day resolution. It also gives values for the current day. To avoid any issues with time zones and changes between standard and daylight-savings time, the days always begin and end at midnight, Greenwich Mean Time.
Estimated Energy Reduction
This calculation is performed once a day based on the day’s volume pumped, energy used, reservoir levels, and a baseline calculated based on historical data.
Projected Energy Reduction
The projected energy reduction for the current day is based on the day’s volume and energy consumption extrapolated to a full day.
DPO Mode Percentage tells how much of the time the pump station was operated according to the recommendations of the DPO.
...