Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 11 Next »

 How do I reset my password?

Users may reset their own password by following the Forgot my Password reset flow. Two-factor reset requires contacting Admin to do it for you.

 How do I send a user password reset e-mail or reset 2-factor authentication? (Admin Users)

Admin may change within Settings menu from the Admin page:

  1. On the Admin Page;

  2. Navigate to the user;

  3. Click the Settings (cog) icon next to the username;

  4. Select Send Password Reset E-mail or Reset Two-Factor button.

 How do I modify user group settings to allow Read/Write access? (Admin Users)

Admin may change within Settings menu from the Admin page:

  1. Navigate to the user;

  2. Click the Settings (cog) icon next to the username;

  3. Select Modify Group Settings.

 How do I remove access for a user? (Admin Users)

Admin may change within Settings menu from the Admin page:

  1. Navigate to the user;

  2. Click the Settings (cog) icon next to the username;

  3. Deselect the Account is Active checkbox.

 I received an alarm for "Can't connect to the device"

  1. Confirm tagger is getting power;

  2. Confirm lights are active on the box;

  3. if both of those are good, trying cycling power to the box ONCE;

  4. If problem persists, contact Specific Energy Tech Support or replace with spare.

Tagger Troubleshooting and Swap Quick Reference Guide

 How do I change the Time Zone on the User Interface?

All time-related widgets will show time based on the user's time zone or the time zone the user has selected in the navigation bar.

 How do I disable autologout?

Right click the Logout countdown and select Disable Autologout. If you disable auto-logout and open a new tab or refresh the page, you will have to disable it again on the new tab or the refreshed page as those actions will re-enable autologout.

 Why won't my browser remember my device?

If you're being prompted for your 6-digit 2FA code on every login (even after opting to remember the device for 30 days), it could be because your cookies or other forms of client-side storage are being deleted.

This happens if you're browsing in incognito mode or if you have a setting enabled here chrome://settings/cookies labeled "Clear cookies and site data when you close all windows".

  • No labels